Home > Casting >

Auto Clamp for Wax Injectors
Auto Clamp for Wax Injectors


 
Our Price: $4,033.80


Item #: 265-2241
Qty:

Description
 
To Make the Perfect Wax Models Every Time, All You Do is Push a Button!
A superb electronic mold holding system. Available in two models, one for interfacing with Yasui Vacuum Wax Injector, the other for most conventional wax injectors. Both connect directly to your wax injector. Installation is simple and takes very little time.
Auto Clamp performs 3 functions:
  1. Auto Clamp maintains equal pressure on the rubber mold as it is automatically pressed against the was injector nozzle. This eliminates vairable pressure insures consistent wax models. Each wax model will weigh exactly the same assuring castings of equal weight.
  2. The rubber mood is held up against the injector nozzle for the entire vacuum and wax injection functions for the exact time you have programmed in your injector. For conventional injectors, Auto Clamp has time settings for holding the rubber mold against the wax injector nozzle. There is no chance for error.
  3. The rubber mold is released from the nozzle only at the time you have set in the Auto Clamp and remains clamped after the wax injection function is complete to allow the wax to cool. This prevents premature opening of the rubber mold which usually results in a damaged wax model.
Perfect alignment to the injector nozzle - every time!
The Auto Clamp clamping system has uniquely designed wrist-action mechanism which perfectly aligns the mold to the injector nozzle. Even if the mold is inserted at an angle, or if the sprue hole in the rubber mold is off centre, the mechanism automatically compensates for any misalignment.

Programable!
  • Auto Clamp can be programmed to meet the specific characteristics of each mold you inject including:
  • Adjustable clamping pressure
  • Adjustable clamping time to allow proper cooling after injecting.
  • Adjustable pressure against the injector nozzle which eliminates flashing.
  • Adjustable backward pressure for smooth, steady action.

Increase Production Rates!
You will see an immediate increase in your wax injection production rate, by as much as 50%, and a drastic decrease in your reject rate.

This Universal Auto Clamp unit features an additional timer so that you can preset the length of time that wax is injected into the mild. No more guessing how long to keep the nozzle depressed, mold is completely filled every time!

Share your knowledge of this product. Be the first to write a review »