Home >

Swiss Cutters, Small Tapered Head
Swiss Cutters, Small Tapered Head


 
Alternative Views:

Swiss-made Cutters are made of high quality ball bearing steel at 63–65 Rockwell Hardness. These 4-3/4" long cutters are available with semi-flush, flush or full-flush blades. No-scratch / anti-glare satin finish.

  • Pointed head shape, slim and optimum balance between durability and accessibility.
  • 2-component user-friendly premium Ergonomic handles with soft comfortable gripping surface and hard plastic core. Most advanced design for comfort, accuracy and continuous use.
  • Dual leaf springs are made of stainless steel.
  • Lap joint with a screw to achieve a high level of strength and precision.
  • Nut is made of hardened alloy steel to resist high cutting load.
  • Screw is fine-pitched for perfect joint adjustment.
  • Made in Switzerland.

#5340: Semi-Flush cutter for soft, medium and hard wire. Has a small oval head.

#5341: Flush cutter for very precise cutting of soft and medium wire. Has a small oval head.

#5342: Full-Flush cutter for perfect flush cutting of soft and medium wire. Has a small oval head.


Please refer to "Extended Information Chart" below for Wire Cutting Capacities for each cutter. Cutting wire thicker than the listed capacity will cause undue wear and tear on the cutter blades and may cause them to break. This type of damage is not covered by warranty.





Instructions:
This is a listing of all Swiss Cutters with wire cutting capacities. All cutters measure approximately 5" overall length (click on style # in chart below to go to that cutter page for exact dimensions).


Style Cutting
Edges		 Head |————— WIRE CUTTING CAPACITY —————|
Copper Wire
(mm / AWG)		 Yellow Gold Wire
(mm / AWG)		 White Gold Wire
(mm / AWG)		 Platinum Wire
(mm / AWG)
5140 Semi-
Flush 		Oval
Small 		0.2-1.2 / 32-17 0.2-1.1 / 32-17 0.2-1.0 / 32-18 0.2-0.9 / 32-19
5141 Flush Oval
Small 		0.1-1.2 / 38-17 0.1-1.1 / 38-17 0.1-1.0 / 38-18 0.1-0.9 / 38-19
5142* Full-
Flush 		Oval
Small 		0.1-1.0 / 38-18 0.1-0.9 / 38-19 0.1-0.8 / 38-20 0.1-0.7 / 38-21
5150 Semi-
Flush 		Oval
Large 		0.3-1.5 / 29-15 0.1-0.9 / 38-19 0.3-1.4 / 29-15 0.3-1.3 / 29-16
5151 Flush Oval
Large 		0.2-1.6 / 32-14 0.2-1.5 / 32-15 0.2-1.4 / 32-15 0.2-1.3 / 32-16
5152 Full-
Flush 		Oval
Large 		0.2-1.2 / 32-17 0.2-1.1 / 32-17 0.2-1.0 / 32-18 0.2-0.9 / 32-19
5160* Semi-
Flush 		Oval
X-Lrg 		0.4-2.0 / 26-12 0.3-1.7 / 29-13 0.3-1.6 / 29-14 0.3-1.4 / 29-15
5161 Flush Oval
X-Lrg 		0.3-1.7 / 29-13 0.3-1.6 / 29-14 0.3-1.5 / 29-15 0.3-1.3 / 29-16
5162 Full-
Flush 		Oval
X-Lrg 		0.3-1.6 / 29-14 0.3-1.3 / 29-13 0.3-1.2 / 29-17 0.3-1.1 / 29-17
5340 Semi-
Flush 		Tapered
Small 		0.2-1.2 / 32-17 0.2-1.1 / 32-17 0.2-1.0 / 32-18 0.2-0.9 / 32-19
5341* Flush Tapered
Small 		0.1-1.2 / 38-17 0.1-1.1 / 38-17 0.1-1.0 / 38-18 0.1-0.9 / 38-19
5342 Semi-
Flush 		Tapered
Small 		0.1-1.0 / 38-18 0.1-0.9 / 38-19 0.1-0.8 / 38-20 0.1-0.7 / 38-21
5352 Full-
Flush 		Tapered
Large 		0.2-1.2 / 32-17 0.2-1.1 / 32-17 0.2-1.0 / 32-18 0.2-0.9 / 32-19
5540 Semi-
Flush 		Tapered
Relieved
Small 		0.2-1.2 / 32-17 0.2-1.1 / 32-17 0.2-1.0 / 32-18 0.2-0.9 / 32-19
5541 Flush Tapered
Relieved
Small 		0.1-1.2 / 38-17 0.1-1.1 / 38-17 0.1-1.0 / 38-18 0.1-0.9 / 38-19
5542* Full-
Flush 		Tapered
Relieved
Small 		0.1-0.8 / 38-20 0.1-0.9 / 38-19 0.1-0.8 / 38-20 0.1-0.7 / 38-21

* Included in 4-Piece Cutter Kit 182-5163.



Share your knowledge of this product. Be the first to write a review »