Is your customer's ring impossible to remove? Not anymore! RingRescue™ is the new Non-Destructive Ring Removal set that belongs in every jewellery store!
In the years past, the only way to remove a ring from a swollen finger was to cut the ring apart with a conventional ring cutter. RingRescue™ is designed to be an innovative practical tool that can be used by anyone in a jewellery store to safely remove rings from swollen fingers. Best of all, without damage to the ring!
RingRescue™ was created to remove rings due to swollen fingers or some type of accident (trauma). Instead of cutting off the ring, which can carry liability, you can now easily, safely and quickly remove it with RingRescue™! Designed by a team of medical doctors and engineers, and tested in jewellery stores, RingRescue™ offers the jewellery industry a new and effective solution for on-the-spot ring removal. With RingRescue™, you can remove an impossibly stuck ring without destroying the ring.
Simply apply RingRescue™ over the affected finger and push the bulb to inflate. The process takes up to 5 or 6 minutes for the most difficult swelling. Once the bulb of the RingRescue™ device is deflated, simply apply lubricant (included) to the area (ring) after compression to help take the ring off, now that the swelling has subsided. The process is that simple and can be completed by one person!
RingRescue™ is a MUST for any jewellery store. Inner diameter of the cuff for your finger is approximately 1" (25.5mm). Outer protective case measures 8.75"L x 2.5"W x 6.75"H (222 x 63.5 x 171.5mm). RingRescue™ in the protective case weighs 1.4 lbs. (.64kg). Made in Canada.
- Blade free removal
- Leaves ring intact
- Safe and simple to use